sE Electronics : PROMIC LASER


Stereo On-camera Microphone

- +
Categories: , Tag:

Pro Mic Laser คือไมโครโฟนสำหรับกล้อง DSLR รุ่นล่าสุดจาก sE Electronic ที่สามารถทำให้การบันทึกเสียงจากกล้องได้อย่างมีประสิทธิภาพ ตอบสนองความถี่เสียงตั้งแต่ 20Hz-20kHz และใช้พลังงานจากถ่านขนาด AAA เพียงก้อนเดียว

ProMic Laser is our first ever DSLR on-camera microphone – a shotgun condenser microphone with a precision-tuned capsule for capturing professional-quality audio direct to camera.

With more and more video recording enthusiasts taking an increased interest in the quality of the audio of their videos, ProMic Laser provides the high-quality audio to match the high-definition video capabilities of today’s DSLR cameras.

Laser, the first release in the ProMic series, is a truly professional solution. It has a rugged aluminium design and comes with a removable wind shield and a custom shockmount for hot-shoe mounting directly onto a DSLR camera.

Laser is battery-powered using a single AAA battery (not included), which means that the microphone has an increased sensitivity level, and a lower noise floor, but the inclusion of a -10dB Pad allows you to reduce the level of the mic for recording louder sources.

The microphone also features a Bass Cut, which gives you the option of removing unwanted low frequency rumble, such as traffic or noise from the camera itself, and this can be used in tandem with the -10dB Pad.

As with all sE Electronics products, ProMic Laser comes with a three-year free replacement warranty, which means if it lets you down, we’ll simply give you a new one.

ProMic Laser comes with a protective carry bag and a 3.5mm coiled jack-to-jack cable to connect the microphone to your camera. Laser is compatible with the upcoming ProMic accessories series, which includes boom poles and fur windshields.


Capsule Type: 9.7mm Electret Condenser
Directional Pattern: Hyper Cardioid
Frequency range: 20 Hz – 20 kHz
Impedance: 105 Ohms
Sensitivity: 31.62 mV/Pa (-30 dB)
Max SPL: 120/130 dB (0/-10 dB pad) (0.5% THD @ 1kHz)
Signal to Noise Ratio: 75 dB
Self Noise: 18 dB(A)
Pass Filter Switch: 80 Hz
Preattenuation Pad: -10 dB
Connector: 3.5mm mini jack (coiled cable included)
Power: ~200 hours from 1x AAA 1.5V battery (battery not included)
Mount: Camera shoe mount with 3/8″ thread for boompole use
Weight: 73g / 2.55oz



มาเป็นคนแรกที่วิจารณ์ “sE Electronics : PROMIC LASER”

อีเมลของคุณจะไม่แสดงให้คนอื่นเห็น ช่องที่ต้องการถูกทำเครื่องหมาย *